Cam angle sensor - r.r.

Make

Fiat

Model

Grande Punto Factory Service Manual

Year

2005–2012

Section

Petrol injection system › Cam angle sensor - r.r.

EngineCam angle sensor - r.r.

CAM ANGLE SENSOR - R.R.

Operation 1056B51 · MULTI-POINT INJECTION SYSTEM (MPI)

1.4 8v

Removing

If the cam angle sensor is replaced, run the following self-learning procedure.

Start the engine without pressing the accelerator pedal, with engine temperature greater than or equal to 20 °C and engine idling for 10 seconds.

- Disconnect the negative battery terminal.

1. Disconnect electrical connection (1a), unscrew the bolts and remove cam angle sensor (1b).

	Description	Connector
1a	Timing sensor	See K047 TIMING SENSOR

Refitting

- Refit the cam angle sensor in its seat, secure with the bolt and connect the electrical connection.

- Connect the negative battery terminal.

08 Engine