SWITCH ON CLUTCH PEDAL - R.R (PETROL ENGINES)

Operation 1056B78 · MULTI-POINT INJECTION SYSTEM (MPI)

1.2 8v, 1.4 8v

Removing

- Work on the left side.

Op. 5010C55 LOWER AIR DIFFUSER (ONE) LH OR RH - R.R

1. Press the clutch pedal and extract pin (1a) of switch (1b) at the end of the travel.

2. Remove the red collar at the end of the travel.

3. Release the retainers (3a) and extract the switch (1b).

4. Disconnect the electrical connection.

Refitting

- Check that the switch is not damaged.

- Lower the clutch pdal and keep it lowered.

1. Remove pin (1a) of switch (1b) at the end of the travel.

2. Remove the red collar at the end of the travel.

1. Connect the electrical connection.

2. Place switch (2a) in position and attach the retainers (2b).

The switch may be fitted in a single position in relation to the seat.

3. Insert the red collar (3a) locking retainers (2b) in its seat.

4. Release the clutch pedal so that lever (4a) returns pin (4b).

- Test the operation of the clutch switch.

Op. 5010C55 LOWER AIR DIFFUSER (ONE) LH OR RH - R.R