Connecting rod small end bush (one) - replace
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Pistons and connecting rods › Connecting rod small end bush (one) - replace
‹ Prev Piston with connecting rod - dismantling at the benchNext › Set of pistons, gudgeon pins and seals - replace pistons and connecting rods at the bench - includes alignment and balan
EngineConnecting rod small end bush (one) - replace
CONNECTING ROD SMALL END BUSH (ONE) - REPLACE
Removing
1. Remove the bush (1a) from the small end using a hydraulic press, a suitable plate (1b) and the tool (1c) constructed as illustrated in the diagram.
| Tool | Description | Function | Validity |
|---|---|---|---|
| 1860821001 | Extractor/ Fitting tool | Small end bush removal/introduction | 1.9 Multijet |
Refitting
1. Fit a new bush (1a) in the small end using a hydraulic press, a suitable plate (1b) and the tool (1c) constructed as illustrated in the diagram.
The bush should be fitted in the small end so that the lubrication port is aligned with the one in the small end.
| Tool | Description | Function | Validity |
|---|---|---|---|
| 1860821001 | Extractor/ Fitting tool | Small end bush removal/introduction | 1.9 Multijet |
- Ream the inner diameter of the small end bush to the recommended figure.
| Measurement | Value | Validity |
|---|---|---|
| Small end bush inner diameter (mm) | 26.006 ÷ 26.012 | 1.9 Multijet |
‹ Prev Piston with connecting rod - dismantling at the benchNext › Set of pistons, gudgeon pins and seals - replace pistons and connecting rods at the bench - includes alignment and balan
Parts & tools for this job For 2005 Fiat Grande Punto
- PARTEngine gasket setSearch: Fiat Grande Punto 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.