Check that the engine oil level is correct

Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY

Check the condition of the fuel supply circuit and make sure that it is working properly carrying out the test

See Test 1060OA LOW FUEL RETURN PRESSURE CIRCUIT CHECK

Check the operation of the low pressure supply circuit

See Test 1060OB LOW FUEL DELIVERY PRESSURE CIRCUIT CHECK

Restore the correct engine oil level

Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY

Select the following control unit at the diagnostic equipment: EDC16C39 Diesel electronic injection control unit. CF4/EOBD CAN (EP engine 1.9)

Check the value of the following parameters:

. Target Diesel pressure

- Diesel pressure measured carrying out test

See Test 1060GH DIESEL PRESSURE CHECK

Check the condition of the fuel supply circuit and make sure that it is working properly carrying out the

See Test 1040OA FUEL SUPPLY CIRCUIT CHECK

Check that the engine oil level is correct

Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY

Check that the engine oil pressure is correct, carry out test

See Test 1084A INDICATORS/CHECK DEVICES

Restore the correct engine oil level

Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY

Check there are no leaks from the engine cooling system into the lubrication system as described in the

See table X12 ENGINE OIL LEAKS