Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Grande Punto Factory Service Manual (2005-2012)22 · Fault diagnosis
22 · Diagnostics

Passenger compartment water penetration, front area

Make
Fiat
Model
Grande Punto Factory Service Manual
Year
2005–2012
Section
Water penetration › Passenger compartment water penetration, front area
Fault diagnosisPassenger compartment water penetration, front area

PASSENGER COMPARTMENT WATER PENETRATION, FRONT AREA

After rain or washing, water infiltration into the front part of the passenger compartment is noticed.

Test results
1CHECK ABSENCE OF WINDSCREEN INFILTRATIONSAll OKProblems encounteredOperation

Check for sealant on the windscreen, see

See Test 7035OA CHECK FOR ABSENCE OF FIXED WINDOW INFILTRATIONS (WINDSCREEN AND REAR SCREEN)

Move on to Step 2Sealant missing.Restore the sealant in accordance with
2WINDSCREEN CHECKAll OKProblems encounteredOperation

Check the windscreen. In particular, visually check:

- glass condition;

- flatness of contact surface;

- flatness of screen-printing.

Move on to Step 3Faults in windscreen

Replace the windscreen

Op. 7035A18 WINDSCREEN GLASS - R.R INCLUDING CLEANING HOUSING

3CHECK THE ENGINE COMPARTMENT BULKHEAD DRAINSAll OKProblems encounteredOperation
Check the bulkhead drains in the engine compartment. In particular check for: for dirt, leaves etc.Move on to Step 4Dirt in the drainsClean the drains. Restore the correct installation if necessary
4CHECK THE ENGINE COMPARTMENT BULKHEADAll OKProblems encounteredOperation

Check the engine compartment bulkhead. In particular, check:

- the plugs are present;

- the plugs are correctly fitted.

- the bulkhead coupling rubber fittings are installed correctly;

- sealant properly applied;

- correct installation.

End of diagnosisFaults in engine compartment bulkhead.Restore the engine compartment bulkhead installation and fastenings.

Parts & tools for this job For 2005 Fiat Grande Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.