Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Idea Factory Service Manual (2003-2012)18 · Body panels and frame
18 · Body & interior

Stripping TAILGATE

Make
Fiat
Model
Idea Factory Service Manual
Year
2003–2012
Section
Stripping for replacement operations › Stripping TAILGATE
Body panels and frameStripping TAILGATE

Stripping TAILGATE

Operation 7205E56 · Exterior parts

Refer to op. 5550D16 third stop light - r+r

Refer to op. 5050C10 rear window washer jet - r+r clean and/or position

Refer to op. 7015A04 tailgate interior panel - r+r

Refer to op. 7015B10 single tailgate lock - r+r or repair with panel/protection removed

1. Disconnect electrical connections (1a), (1b), (1c).

NameConnector
1aNumber plate lightsF52
NameConnector
1bRear window wiper motorN16
NameConnector
1cHeated rear windscreenP55A
NameConnector
1cHeated rear windscreenP55B

2. Disconnect the wiring from the retainers.

3. Connect a probe to one end (3a) of the wiring and a probe to end (3b) to help refit the wiring.

4. Prise up wiring duct (4a) from hole (4b) in the tailgate.

5. Remove wiring (5a) from the tailgate through hole (4b).

Stripping TAILGATE

Refer to op. 5050C34 rear wiper arm with blade - r+r

Refer to op. 5050C42 rear wiper motor - r+r

Refer to op. 7015B30 exterior handle or block support - r+r with panel/protection removed

Parts & tools for this job For 2003 Fiat Idea

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.