Cd changer not working
- Make
- Fiat
- Model
- Idea Factory Service Manual
- Year
- 2003–2012
- Section
- Radio and accessories etc. › Cd changer not working
CD CHANGER NOT WORKING
The CD-Changer is supplied and operated directly by the radio module.
| Results of the tests | ||||
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
Check that the fault does not stem from incorrect use. Check that the buttons are working on versions with controls on the steering wheel | Continue to Step 1 | CD not correctly positioned | Restore the correct position. | |
| Faulty CD holder | Restore the operation of the CD holder. | |||
| Controls on the steering wheel faulty | Continue according to the instructions See table N70 CONTROLS ON THE STEERING WHEEL NOT WORKING | |||
| 1 | CHECKING ELECTRICAL EQUIPMENT | All OK | Problems met | Operation |
With the CD-Changer and radio removed from their housing, carry out See Test 5580PH Check operation of CD- Changer module and radio module On the disconnected CD-Changer connector, check in the following order:
Check, on the radio connector:
Check for audio signals, at the radio connector, coming from the CD Changer. | Continue to Step 2 | Radio faulty | Replace the radio Op. 5570T80 | |
| Wiring between CD Changer and radio faulty. | Renew the electrical connections See E3510 RADIO | |||
| CD Changer faulty. | Replace the CD-Changer Op. 5570T84 | |||
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace the radio Op. 5570T80 | |
Parts & tools for this job For 2003 Fiat Idea
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Idea
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.