Cam angle sensor - r r

Operation 1060G22 · Pressure pump electric control

1.9 JTD 8V

Removing

- 4450B10 Front WHEEL (one) - R.R.

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 1092G10 single engine belt r r

- 1092A12 crankshaft pulley - r+r for versions with air conditioner

- 1032D12 timing system protective cover(s) - r + r

- 1016A10 sound-proofing cover - r + r

- 1008C10 power unit upper reaction link r r

- 1008C14 engine link bracket - r r

- 1032B14 toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner

1. Remove the tool to prevent the pulley from turning.

2. Unscrew retaining bolt (2a) and remove pulley (2b) from its seat on the camshaft.

3. Undo bolts (3a) and remove sensor (3b).

Refitting

Fit the sensor and tighten the retaining bolt.

Tighten the sensor bolts to torque.

Fit the pulley into its seat on the camshaft.

Screw in the retaining bolt and retain the pulley using the tool before tightening the bolt to torque.

- 1032B14 toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner

- 1008C14 engine link bracket - r r

- 1008C10 power unit upper reaction link r r

- 1016A10 sound-proofing cover - r + r

- 1032D12 timing system protective cover(s) - r + r

- 1092A12 crankshaft pulley - r+r for versions with air conditioner

- 1092G10 single engine belt r r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 4450B10 Front WHEEL (one) - R.R.