Engine RPM SENSOR - R.R.

Operation 1060G20 · Pressure pump electric control

1.9 JTD 8V

Removing

Place the vehicle on a lift.

Disconnect the battery negative (-) terminal.

1. Disconnect the condensed oil return pipe from the sump.

Disconnect the electrical connection for the rpm and timing sensor.

2. Undo bolts (2a) and remove rpm and timing sensor (2b).

Refitting

Fit the rpm and timing sensor and tighten the retaining bolt.

Connect the electrical connection.

Connect the condensed oil return pipe to the sump.

Connect the negative (-) battery terminal.

Remove the vehicle from the ramp.