Fuel injectors

Operation 1060F10 · Injectors and lines

1.9 JTD 8V

Removing

Open the bonnet lid.

- 1016A10 sound-proofing cover - r + r

1. Disconnect the electrical connections from the injectors.

2. Disconnect fuel return pipe (2a) for lubricating the injectors by removing clip (2b).

3. Undo bolts (3a), remove bracket (3b) and take out injectors (3c).

Refitting

Check the injectors are in good condition.

Fit the injectors in their seats.

Fit the bracket and tighten the retaining nuts.

Fit the fuel return pipe for lubricating the injectors and secure it with its clips.

Connect the electrical connections to the injectors.

- 1016A10 sound-proofing cover - r + r

Close the bonnet lid.