Fuel delivery manifold - r r

Operation 1060F30 · Injectors and lines

1.9 JTD 8V

Removing

Open the bonnet lid.

- 1048A10 air cleaner filtering element - replace

- 5530B10 battery - r+r

- 1016A10 sound-proofing cover - r + r

- 1080D34 engine oil vapour separator - r + r

- 1060F50 fuel return manifold - r r

- 1060F36 lines to injectors - r r

1. Disconnect the electrical connection from the fuel pressure sensor.

2. Loosen the manifold side connector from the pipe leading from the pressure pump to the manifold.

3. Loosen the pressure pump side connector from the pipe leading from the pressure pump to the manifold.

4. Remove the pipe

5. Undo nuts (5a) and remove the single fuel manifold pipe (5b).

Refitting

Fit the single fuel manifold pipe and fix it using the nuts.

Whenever you work on the fuel lines, always fit new lines upon reassembly to prevent leakage from the fittings.

Fit a new delivery pipe to the fittings.

Tighten the connector on the pipe carrying fuel to the manifold to torque and then tighten the connector on the pressure pump to torque.

Connect the electrical connection to the fuel pressure senor.

- 1060F36 lines to injectors - r r

- 1060F50 fuel return manifold - r r

- 1080D34 engine oil vapour separator - r + r

- 1016A10 sound-proofing cover - r + r

- 5530B10 battery - r+r

- 1048A10 air cleaner filtering element - replace

Close the bonnet lid.