Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 21 Gearbox and differential04 33 Braking system05 41 Steering06 44 Suspension and wheels07 27 Axle and rear differential (4x4)08 24 Propeller shaft (4x4)09 55 Electrical system10 70 Bodywork
Fiat Panda (141) Factory Service Manual (1986-2003)01 · 00 Introduction and technical data
01 · General

Alternator

Make
Fiat
Model
Panda (141) Factory Service Manual
Year
1986–2003
Section
Technical data (2000 range) › Alternator
00 Introduction and technical dataAlternator

ALTERNATOR

Make and type DELPHI
CS121D – 14V – 60A
DENSO
A115I – 14V – 33/60A
Rated system voltage V 14
Max current A 65 60
Cut in speed when warm rpm 1800 1800
Current delivery at the battery at 7000 rpm
at operating temperature
A 65 60
Field winding resistance between the two
slip rings (*)
Ω 1.8±5% 2.8±5%
Direction of rotation (seen from control side) clockwise
Diode power rectifiers pre-constructed bridge

(*) Data obtained at an ambient temperature of 20°C.

VOLTAGE REGULATOR

Electronic built into the alternator type 19009747 Chip RTM 200.01
Alternator speed for test rpm 7000
Thermal stabilization corrector A –
Test curret A –
Regulation voltage (*) V 14.00-14.63 14.05-14.35

(*) Data obtained at an ambient temperature of 20°C.

BATTERY

System rated V 12
Capacity (20 hour discharge) Ah 40

Parts & tools for this job For 1986 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.