Shock absorbers
- Make
- Fiat
- Model
- Panda (141) Factory Service Manual
- Year
- 1986–2003
- Section
- Technical data (2000 range) › Shock absorbers
00 Introduction and technical dataShock absorbers
Rear suspension tubular structure omega (Ω) shaped rigid axle with centre hinges and longitudinal reaction arms; coil springs and double acting, telescopic shock absorbers.
| F1 | 1108 MPI | 1108 MPI | |
|---|---|---|---|
| Panda | Panda Van | ||
| Coil springs | |||
| Order No. | 46768802 | 7557202 | |
| Diameter of wire mm | 10.2±0.05 | 11.7±0.05 | |
| Number of coils | 4 | 4.5 | |
| Direction of coil | clockwise | clockwise | |
| Height of spring released mm | 288 | 258.7 | |
| Height of spring under a load of: | 257 ±10 daN mm | 170 | – |
| 265 ±10 daN mm | – | 170 | |
| The springs have been divided into two categories identifiable by a mark yellow (1) for those under a load of: |
257 daN having a height of mm | >170 | – |
| 265 daN having a height of mm | – | >170 | |
| green (1) for those under a load of: | 257 daN having a height of mm | ≤170 | – |
| 265 daN having a height of mm | – | ≤170 | |
(1) Springs of the same type must be fitted.
Shock absorbers
| F2 | Type: double acting, telescopic (low pressure gas) | BOGE - WAY - ASSAUTO | |
|---|---|---|---|
| Order No. | 7720252 | 7600789 | |
| Open (start of damping action) mm | 420 ±3 | 420 ±3 | |
| Closed (metal against metal) mm | 252 ±3 | 252 ±3 | |
| Travel mm | 168 | 168 | |
Parts & tools for this job For 1986 Fiat Panda
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Fiat Panda 1986 shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.