Carburettor
- Make
- Fiat
- Model
- Panda (141) Factory Service Manual
- Year
- 1986–2003
- Section
- Technical data (Panda Dance) › Carburettor
00 Introduction and technical dataCarburettor
CARBURETTOR
| Description | Unit | WEBER 32 ICEV 61/250 | |
|---|---|---|---|
| Venturi | mm | 22 | |
| Auxiliary venturi | mm | 3,5 | |
| Main jet | mm | 1,10 | |
| Air bleed jet | mm | 1,80 | |
| Emulsion tube | F 74 | ||
| Idle jet | mm | 0,47 | |
| Air idle jet | mm | 1,60 | |
| Anti-siphoning device | mm | 1,00 | |
| Progression holes | 1st | mm | 1,00 |
| 2nd | mm | 1,00 | |
| 3rd | mm | 1,00 | |
| 4th | mm | 1,00 | |
| 5th | mm | - | |
| Progression slot | mm | - | |
| Continuity hole | mm | - | |
| Idle mixture adjustment hole | mm | 1,50 | |
| Idle mixture bush | mm | 1,30 | |
| Superfeed jet | mm | 0,70 | |
| Superfeed mixture jet | mm | 2,50 | |
| Pump jet | mm | 0,40 | |
| Pump outlet | mm | 0,40 | |
| Pump capacity (for 10 strokes) | cm³ | 3,8 ÷ 6,3 | |
| Full power jet | mm | 0,50 | |
| Anti-flooding capsule bush | mm | 0,70 | |
| Idle anti-flooding device | mm | 4,25 ÷ 4,75 | |
| Cold start automatic anti-flooding device | min opening | mm | - |
| max opening | mm | - | |
| Fast idle | mm | 0,75 ÷ 0,80 | |
| Needle valve | mm | 1,50 | |
| Float level with gasket | mm | 10,50 ÷ 11,00 | |
| Float travel | mm | - | |
| Fuel ricirculation hole | mm | 1,00 | |
| Advance hole | mm | - | |
Parts & tools for this job For 1986 Fiat Panda
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.