Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Fiat Panda Factory Service Manual (2003-2012)20 · Wiring diagrams and electrical functions
20 · Electrical

ELECTRIC FRONT WINDOWS - Description

Make
Fiat
Model
Panda Factory Service Manual
Year
2003–2012
Section
Electrically activated devices › ELECTRIC FRONT WINDOWS - Description
Wiring diagrams and electrical functionsELECTRIC FRONT WINDOWS - Description

ELECTRIC FRONT WINDOWS - Description

Description

The front electric windows are operated by means of the switches in the dashboard.

They can be operated either manually or automatically, according to the following logic:

  • manual operation takes place by pressing the control switch for between 50ms and 300ms;
  • automatic operation takes place by pressing the control switch for longer than 300ms.

The operation of the electric windows is interrupted in the following cases:

  • when automatic movement is in progress and the control switch is pressed again (up or down);
  • at the end of travel (bottom or top), during both automatic and manual movement.

If the ignition is turned OFF, the electric windows function is activated for around 2 minutes, in manual mode only. This function is inhibited if one of the two doors is opened.

Parts & tools for this job For 2003 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.