Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1697 TD) › Removing-refitting
10 EngineRemoving-refitting · page 1 of 10

Removing-refitting

Detail of engine components with arrows indicating connection points, caption P3M002X01
Top view of engine air intake area with arrows pointing to clips and screws, caption P3M002X02
Close-up of vacuum pipe and connector on engine, caption P3M002X03
Wide view of engine bay showing battery, air intake, and fuel lines, caption P3M002X04
  1. Disconnect the clutch cable and disconnect the earth lead.
  2. Unscrew clip and screws indicated, then remove air intake pipe to cleaner.
  3. Loosen clip, then disconnect vacuum pipe and connector shown in figure.
  4. Separate lead indicated from battery terminal.
  5. Unscrew screw and disconnect fuel delivery pipe to pump.
  6. Remove clip and disconnect fuel return pipe from pump.
Close-up of battery terminal and earth lead connection, caption P3M002X05
Close-up of fuel delivery pipe connection at pump, caption P3M002X06
Close-up of fuel return pipe connection at pump, caption P3M002X07

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.