Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting (page 2 of 10)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1697 TD)
10 EngineRemoving-refitting · page 2 of 10
Engine bay showing various pipes and connections with arrows pointing to specific components
Close-up of engine components with arrows indicating connection points on a bracket or housing
Engine compartment view with arrows highlighting specific pipe connections near the firewall
Full engine bay overview showing the engine, battery, and surrounding components from above
  1. Loosen clips and disconnect pipes from thermostat to radiator and pump to vehicle interior heater.
  2. Loosen clips and disconnect coolant return lines from interior heater, from the radiator and from the expansion tank.
  3. Disconnect mileometer point and speedometer from gearbox.
  4. Unscrew retaining nuts, loosen clip and disconnect sleeve.
  5. Unscrew retaining nuts, disconnect sleeve by loosening clip and then remove the air cleaner.
  6. Drain fluid from power steering system. Then disconnect pipes from power steering pump.
Engine side view showing the air cleaner assembly and intake manifold area with arrows pointing to fasteners
Close-up of the power steering pump area with arrows indicating pipe connection points
Power steering pump detail showing mounting bolts and fluid line connections with arrows

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.