Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting (page 9 of 10)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1697 TD)
10 EngineRemoving-refitting · page 9 of 10
View from underneath the vehicle showing the exhaust pipe connection with arrows indicating the bolts to be removed

P3M010X01

Close-up view of the exhaust pipe joint and flexible section

P3M010X02

  • unscrew the bolts shown in the figure. Then remove the exhaust pipe and seal;
Vehicle being lifted by a hoist using a universal hook attached to the power unit support brackets

P3M010X03

  • lower vehicle to the ground;
  • position universal hook 1860592000 in the power unit support brackets and apply a hoist;
  • use hoist to take up slack in power unit support cables;

NOTE The figure below shows the position of the hooks in the power unit support brackets.

Close-up of the universal hook engaged in the power unit support bracket on the left side

P3M010X04

Close-up of the engine area showing various components and connections

P3M010X06

Close-up of the universal hook engaged in the power unit support bracket on the right side

P3M010X06

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.