Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting (page 10 of 10)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1697 TD)
10 EngineRemoving-refitting · page 10 of 10
Illustrates engine mount bolt tightening sequence and torque specifications
Two images showing the central mount bolts and gearbox area with arrows indicating removal direction.
Image of the removed central mount component.

P3M011X03

  • unscrew central mount bolts from body (left hand box);
  • position a hydraulic jack temporarily in order to support power unit;
  • remove central mount from gearbox after unscrewing bolts (right hand box);
Two images showing the front left and right mounts with arrows indicating screw removal points.
  • unscrew screws retaining power unit front left mount (left hand box);
  • unscrew screws retaining power unit front right mount (right hand box);
Image of the power unit being lifted out of the engine bay by a hoist.
  • remove power unit from engine bay by means of hoist and place on board below;

Seek the aid of a second operator.

Car engine bay with hood open, showing components and tools

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.