Belt and pulley mechanism
- Make
- Fiat
- Model
- Punto (176) Factory Service Manual
- Year
- 1993–1999
- Section
- Automatic transmission (Selecta) › Belt and pulley mechanism
21 Gearbox and differentialBelt and pulley mechanism · page 1 of 2
Belt and pulley mechanism
The assembly consists of a pair of pulleys, which can expand or contract in an axial sense, and a metal belt that consists of steel blocks mounted on a steel band.
The transmission ratio can vary continuously from a minimum (ratio = 2.503) to a maximum (ratio = 0.497), depending on the pulley/belt contact diameter ratio.
The pulley width is regulated by hydraulic pressure acting on the pulley-centres where they are mounted on the input and output shafts.
- Primary chamber
- Primary pulley
- Metal belt
- Secondary pulley
- Secondary chamber
Parts & tools for this job For 1993 Fiat Punto
- PARTTransmission filter kitSearch: Fiat Punto 1993 transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Fiat automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.