Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)04 · 21 Gearbox and differential
04 · Transmission

Removing-refitting hydraulic control unit

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Automatic transmission (Selecta) › Removing-refitting hydraulic control unit
21 Gearbox and differentialRemoving-refitting hydraulic control unit · page 1 of 2

REMOVING-REFITTING HYDRAULIC CONTROL UNIT

Diagram showing the hydraulic control unit and oil sump assembly
  • Remove oil sump and filter as described on page 46 in order to gain access to hydraulic control unit;
Diagram showing hands disconnecting a supply connector from the hydraulic control unit
  • disconnect supply connector shown in figure;
Diagram showing hands releasing a cam control cable from a block on the hydraulic control unit
  • release cam control cable inside transmission from block on hydraulic control unit;

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.