Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)08 · 50 Auxiliary units
08 · General

Refitting

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Heating/ventilation › Refitting
50 Auxiliary unitsRefitting
Diagram showing a solenoid assembly with a screwdriver removing the retaining screw labeled G

P3M014H01

Remove solenoid lead retaining screw (G).

Diagram showing a hand using a tool to remove a retaining ring H from a solenoid assembly I, with an inset detail of the ring

P3M014H02

Remove ring (H) retaining solenoid and solenoid (I)

Refitting

Diagram showing disassembled components including a solenoid, a seat L, and an assembly with a pin M

P3M014H03

Reassemble the components by reversing order of operations described for disassembly with particular attention to the following details:

Refit solenoid taking care to insert pin (M) properly in seat (L)

Diagram showing a compressor pulley assembly with an inset detail of a retaining ring N

P3M014H04

Refit ring (N) retaining pulley with convex part facing upward

When fitting, replace all retaining rings removed previously

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.