Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)10 · 70 Bodywork
10 · Body & interior

Removing-refitting lower side trim (page 2 of 2)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Rear tailgate
70 BodyworkRemoving-refitting lower side trim · page 2 of 2
Diagram showing the release of tensioning cables from the seat backrest, with arrows indicating the direction of release.
- release the tensioning cables from the seats shown in the diagram, then lift up the cover along the backrest to allow access to the head restraint retaining hooks;
Close-up view of a metal head restraint retaining hook mechanism.
Component part of the head restraint assembly, appearing as a black plastic housing or cover.
Rear view of the seat backrest frame showing two upward-pointing arrows indicating the location of the retaining hooks.
- press on the retaining hooks, shown by the arrows, then extract the head restraint;

NOTE The inset shows the retaining hook and the housing for the head restraint support pin.

Seat backrest frame showing a clip securing the upholstery to the frame, indicated by an arrow.
- remove the clip securing the upholstery to the seat frame, then remove the backrest cover and upholstery;

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.