Assembly
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Repair procedures introduction › Assembly
ASSEMBLY
It is show an assembly view of the unit which illustrates the parts.
Then there is the contents of the expected operations for the unit. Follow,in code order, the operations.
In these pages the running head is at subgroup level and the single units follow one another until they complete the subgroup itself.
OPERATION
The single operation is characterized by a code and by a denomination which are common to the "Time taken for repair".
The procedure that constitutes the operation is formed by a series of phases which represent the single actions that the repairer has to carry out. If the phases are numbered, the number represents the reference in the following figure.
If the phases are distinguished with a dash (-) it means that the phase is not illustrated.
5050B34 Front windscreen wiper arm(s) with blade - R.R.
Removal
- Open the engine compartment cap and remove the nut cover plate.
- Unscrew the nut.
- Remove the wiper arm.
Re-installation
- Check the wiper arm and the plate are not damaged.
- Re-install the wiper arm and fix it by nut.
- Insert the nut cover plate.
- Check the windscreen operation.
Parts & tools for this job For 1998 Fiat Seicento
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.