Group

WARNING
The Operation denominations are automatically acquired from the ones used in "Time taken for repairs" which refers to several models.
It is therefore possible to find in some parts Operations whose denomination is not pertinent for the model in hand (for ex. Op. 4410A12 - Shock absorber of front suspension (one), lh or rh - for McPherson solution takes the group dissasembly/reassembly at bench - R.R.).

This part illustrates the repair procedures provided for the car and structured in accordance with a common coding to the "Time taken for repairs". So,once the kind of work that has to be made (operation code) and the consultation of the other parts which are organized following the same structure (Descriptions and working" and "Tests") are determined, the consultation is immediate. The operation code consists of:

The hierarchic structure of the part is determined as follows:

GROUP

At the beginning of the group it is specified the group contents with the discussed subjects. Then follow the contents of the subgroups which form the group and the graphic index of the group which illustrates the group itself and the respective subgroups.Moreover possible additional details are given (Warnings, Precautions, etc.)
In these pages the running head carries the group symbol, its code and its denomination.

SUBGROUP

At the beginning of the subgroup it is specified the subgroup contents with the discussed subjects. Then there is the index of the units which form the subgroup and the subgroup graphic contents which show the subgroup itself and the respective assembly.Moreover, possible additional details are given (Warnings, Precautions, etc.

In these pages the running heads carries the group symbol, the subgroup code and its denomination.

Original page

View full sizeFit to page