Group

IMPORTANT NOTES
The names of the operations are acquired automatically from those used in the "Repair flat-rate manual" which referrs to a number of models.
It may occur therefore, that within some sections of the Operations where the name is not relative to the model in question(e.g. Op. 4410A12 - Front suspension shock absorber (one), LH or RH - for McPherson solution includesthe removal / refitting on the bench of the group - S.R.).

This section illustrates the repair procedures for the vehicle and is structured in accordance with a code shared with the "Repair flat-rate manual".
In this way reference to the section once the type of intervention to be carried out has been defined (Operation Code) and the navigation to the other sections organised in accordance with the same structure ("Descriptions and operation" and "Tests"), is immediate. The operation code is thus composed:

1. Group
2. Subgroup
3. Assembly
4. Operation

The heirarchical structure of the section is thus defined:

GROUP

The Group contents are given at the start of the group. This is followed by the index to the Subgroups which form the group and the graphic group contents which illustrates the group itself and the relative Subgroups. Additional information (warnings, precautions etc.) arealso given.
On these pages the heading shows the group symbol, its code and its name.

SUBGROUP

The subgroup contents are given at the start of the subgroup. This is followed by the index to the Units contents which form the subgroup itself and the relative assemblies. Additional information (warnings, precautions etc.) are also given.

On these pages the heading gives the group symbol, the subgroup code and its name.