Reassembly (page 2 of 2)
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Engine and power unit (1108)
10 EngineReassembly · page 2 of 2
(Cont. Op. 1004D10)
- Tighten the starter motor screws to the correct torque
| Fastening | Component | Ø | Value (daNm) |
|---|---|---|---|
| Screw | STARTER MOTOR | M8 | 2.0 |
- Lift the power unit with the hydraulic trestle.
- Fit the gear case guard.
- Tighten the guard screws to the correct torque
| Fastening | Component | Ø | Value (daNm) |
|---|---|---|---|
| Screw | GEAR CASE GUARD | M6 | 0.5 |
- Lower the power unit and place it on a pallet.
- Free the power unit from the sling.
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.