Refitting

(Cont. Op. 1008A42)

- Raise the car. - Remove the front left wheel (see Op. 4450B10 WHEEL (one) front - R+R.). 1. Unscrew the screws fastening the flexible block on gearbox side to the body. 2. Unscrew the rigid support - gearbox fastening screws.

- Remove the power unit support on gearbox side. 1. Unscrew screw (1a) and separate the flexible block (1b) from the rigid support on gearbox side (1c).

Refitting

- Join the flexible block to the rigid support on gearbox side and tighten the screw to correct torque - Reposition the power unit support gearbox side. - Tighten the rigid support to gearbox fastening screws to correct torque - Tighten the screws fastening the flexible block gearbox side to the body to correct torque Assemble the front left wheel (see Op. 4450B10 WHEEL (one) front - R+R.). - Lower the car. - Free the power unit from the sling and remove the engine support cross member. - Remove the bracket sustaining the engine from the exhaust manifold stud bolt and tighten the nut to correct torque

(Cont.)