Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Power unit mounts (899) › Refitting
10 EngineRefitting

(Cont. Op. 1008A46)

Refitting

  • Reposition the power unit front support.
  • Tighten the front rigid support to engine fastening screws and nut to correct torque
AttachmentComponentØValue (daNm)
-ScrewFRONT RIGID SUPPORTM105.1
-NutFRONT RIGID SUPPORTM105.1
  • Tighten the front flexible block to body fastening screws to correct torque
AttachmentComponentØValue (daNm)
-ScrewFRONT FLEXIBLE BLOCKM105.1
  • Assemble the right supplementary wheel housing (see Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R+R.).
  • Assemble the front right wheel (see Op. 4450B10 WHEEL (one) front - R+R.).
  • Lower the car.
  • Free the power unit from the sling and remove the engine sustaining cross member.
  • Remove the bracket sustaining the engine from the exhaust manifold stud bolt and tighten the nut to correct torque
AttachmentComponentØValue (daNm)
-NutEXHAUST MANIFOLDM82.0
  • Fit the coolant pipe on the ignition coil support.
  • Connect the negative (-) battery terminal
NameConnector
-BatteryA1
  • Remove the vehicle from the hoist.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.