Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Power unit mounts (899) › Refitting
10 EngineRefitting

(Cont. Op. 1008B20)

  • Follow Op. 1008A44 REAR RIGID SUPPORT of power unit - R+R.

Refitting

  • Tighten the flexible block - rear rigid support fastening nut to correct torque
AttachmentComponentØValue (daNm)
-NutREAR FLEXIBLE BLOCKM105.1
  • Complete with Op. 1008A44 REAR RIGID SUPPORT of power unit - R+R.
  • Connect the negative (-) battery terminal
NameConnector
-BatteryA1
  • Remove the vehicle from the hoist.

1008B30 - FLEXIBLE BLOCKS(S) ON SUPPORT GEARBOX SIDE - REPLACE

Removal

  • Position the vehicle on a hoist.
  • Disconnect the negative (-) battery terminal.
NameConnector
-BatteryA1
  • Raise the car.
  • Remove the front left wheel (see Op. 4450B10 WHEEL (one) front - R+R.).
  • Place a hydraulic jack under the gearbox.
  1. Unscrew the flexible block screw.
  2. Unscrew the flexible block screws and remove the block.
Technical diagram showing a bolt, washer, and flexible block assembly connected to an engine component, with callout numbers 1 and 2.

Refitting

  • Tighten the screw securing the flexible block to the rigid support to correct torque
AttachmentComponentØValue (daNm)
-ScrewFLEXIBLE BLOCK GEARBOX SIDEM106.5
  • Tighten the screws fastening the flexible block to the car body to the correct torque
AttachmentComponentØValue (daNm)
-ScrewFLEXIBLE BLOCK GEARBOX SIDEM83.0
  • Remove the hydraulic jack.
  • Assemble the front left wheel (see Op. 4450B10 WHEEL (one) front - R+R.).
  • Lower the car.
  • Connect the negative (-) battery terminal
NameConnector
-BatteryA1

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.