Reassembly (page 2 of 2)
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Manual gearbox with differential (1108)
21 Gearbox and differentialReassembly · page 2 of 2
(Op. 2110B40continued)
- Fill the gearbox with oil through the filler hole
| Type | Component | Description | Qty |
|---|---|---|---|
| - | Oil (I) | MANUAL GEARBOX/DIFFERENTIAL TUTELA ZC 75 SYNTH (SAE 75W90) | 2.4 |
- Check that the oil level reaches the lower edge of the filler hole.
- Clean the filler cap and tighten it to the specified torque
| Fastening | Component | Ø | Value (daNm) |
|---|---|---|---|
| - | Cap | MANUAL GEARBOX/DIFF. CAPS M22 | 4.6 |
- Complete with Op. 7055B42 SUPPLEMENTARY WHEEL ARCH (one) - R+R.
- Complete with Op. 4450B10 WHEEL (one) front - R+R.
- Lower the vehicle.
- Connect the battery (-) terminal
| Description | Connector | |
|---|---|---|
| - | Battery | A1 |
- Close the engine compartment.
- Remove the car body from the car lift.
Parts & tools for this job For 1998 Fiat Seicento
- PARTClutch kitSearch: Fiat Seicento 1998 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Fiat Seicento manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.