3310a60 - front brake pad - replacement
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Disc brakes › 3310a60 - front brake pad - replacement
‹ Prev 3310a57 - front brake caliper bracket (one, lh or rh - r.r.Next › Repair procedures disc brakes
33 Braking system3310a60 - front brake pad - replacement
3310A60 - FRONT BRAKE PAD - REPLACEMENT
Removal
- Position the vehicle on a shop jack.
- Perform Op. 4450B12 Front WHEELS (two) - R.R.
- Remove the front brake caliper hose from the bracket.
- Remove the lower pin fastening clip.
- Remove the lower front brake caliper lower fastening pin.
- Shift the front brake caliper upwards.
- Remove the front brake pads.
- Perform the same operation on the other front brake caliper.
Reassembly
- Compress the front brake caliper piston with a tool similar to that shown in the figure below.
- If required, remove and replace the front brake pad fastening spring.
- Fit new front brake pads on the front brake caliper bracket.
- Reposition the front brake caliper on the front brake pads.
- Insert the front brake caliper fastening pin.
- Fit the lower fastening pin clip.
- Fit the front brake caliper hose to the bracket.
- Perform the same operation on the other front brake caliper.
(Cont..)
‹ Prev 3310a57 - front brake caliper bracket (one, lh or rh - r.r.Next › Repair procedures disc brakes
Parts & tools for this job For 1998 Fiat Seicento
- PARTFront brake padsSearch: Fiat Seicento 1998 front brake pads
- TOOLCaliper piston rewind toolSearch: brake caliper piston rewind tool
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.