Reassembly

(Op. 3380A30continued)

1. Remove the ends of the handbrake wire from the rear brake drums.

• Remove the complete handbrake cable from the intermediate fasteners.

Reassembly

• Fit the complete handbrake wire.
• Fit the handbrake return linkage and handbrake wire onto the handbrake linkage.
• Partially screw the adjustment plate and lock nut.
• Fit the ends of the handbrake wire sheath into the support.
• Fit the complete wire to the intermediate fasteners.
• Fit the ends of the handbrake wire to the rear brake drum controls.
• Complete with Op. 3380A04 HANDBRAKE - Stroke adjustment.
• Remove the vehicle from the shop jack.

3380A40 - LINKAGE SUPPORTS AND TRANSMISSION- R.R.

• Refer to Op. 3380A30 Handbrake control wire - R.R.

3380A44 - HANDBRAKE CONTROL AND LINKAGE GUARDS - R.R.

Removal

• Position the vehicle on a shop jack.

1. Remove the nuts.
2. Remove the handbrake control guard.

Reassembly

• Fit the handbrake control guards and torque the fastening nuts.

• Remove the vehicle from the shop jack.