Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)07 · 41 Steering
07 · Steering & suspension

Reassembly

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Steering box › Reassembly
41 SteeringReassembly

(Cont.d Op. 4120A10)

  1. Slacken the nut (1a) and remove the screw (1b) of the steering shaft joint fastening part.
Diagram showing steering shaft joint with callouts 1a and 1b
- Raise the car. - Follow Op. 4450B12 WHEELS (two) front - R+R. 1. Slacken the nuts of the adjustable track rod articulated joints.
Diagram showing adjustable track rod articulated joint with callout 1
1. Separate the adjustable track rod articulated joints from the front hub uprights using the tool
DescriptionCode
1Puller1.847.035.000
Diagram showing exhaust pipe attachment to engine/manifold with callout 1
- Follow Op. 1076B50 Exhaust PIPE attachment to engine/manifold - R+R. 1. Slacken the screws (1a) fastening the steering box (1b) and remove it.
Diagram showing steering box fastening screws with callouts 1a and 1b
- Carry out Op. 4110B14 Steering TRACK RODS - R+R. with steering box removed.

Reassembly

- Complete with Op. 4110B14 TIRANTI sterzo - R+R. with steering box removed. - Re-position the steering box and temporarily tighten the fastening screws a little. - Lower the vehicle. - Insert the steering shaft joint on the steering box pinion in accordance with the position marked during removal. - Raise the car. 1. Tighten the screws (1a) fastening the steering box (1b) to the specified torque

(Cont.d)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.