Refitting

(Cont. Op. 5510C10)

1. Lift the spark plug coils (1a)and disconnect the electric connections (1b).

2. Remove the fastening screws (1a) and remove the ignition coils (1b).

Refitting

The ignition coils are the same and interchangeable providing you respect the spark plug wire assembly sequence.

• Assemble the ignition coils and screw the fastening screws.
• Connect electric connections and spark plug wires.
• Assemble coil guard, screw the fastening screw. Refit the air intake sleeve.

5510C34 - ENGINE REV AND TIMING SENSOR (SINGLE) - R.R.

Removal

• Position the vehicle on a shop jack.

1. Release the electric connection (1a) from the plastic fastening (1b) and disconnect it.

1. Lift the vehicle. Remove the fastening screws (1a) and the rev sensor (1b) by pulling out the previously released wire.

(Cont..)