Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)11 · 70 Bodywork
11 · Body & interior

7030h14 - hood - r.r.

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Sunroof and soft-top › 7030h14 - hood - r.r.
70 Bodywork7030h14 - hood - r.r.

7030H14 - HOOD - R.R.

Removal

  • Carry out Op. 7065C30 - Passenger compartment HANDLE (one), lh or rh - R.R.
  • Carry out Op. 7065C34 - SUNSCREEN VISOR (one), lh or rh - R.R.
  • Carry out Op. 7065C68 - REAR VIEW MIRROR - R.R.
  • Carry out Op. 7040E10 - FRONT COURTESY LAMP R.R.
  • Carry out Op. 7055A62 - ONE PILLAR MOLDING, lh or rh - R.R.
  • Carry out Op. 7030H28 - HOOD SLIDING MOTOR PROTECTION - R.R.
  • Carry out Op. 7040H16 - ROOF PANEL TRIM FOR MODELS WITH SUNROOF - R.R.
  1. Unscrew the frame clamping nuts (1a)to the roof panel , remove the clamping section bars (1b).
Line drawing of a car showing an arrow pointing upwards at the sunroof area and callout number 1 on the roof panel.
  1. Remove the sealant along the hood perimeter paying attention not to damage the painting.
Line drawing of a rectangular sunroof frame with callout numbers 1a indicating the frame and 1b indicating the clamping bars.

You should remove/install the complete sunroof with the canvas slightly open to ensure the frame is positioned correctly.

  1. Work from the car outside, remove the hood.
Line drawing of a car with the sunroof hood removed, exposing the opening, with callout number 1 pointing to the roof edge.
  • Clean the hood edge from the residual sealant.

(Cont..)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.