Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)11 · 70 Bodywork
11 · Body & interior

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Sunroof and soft-top › Refitting
70 BodyworkRefitting

(Op. 7030C14 continued)

Refitting

  • Place the seal starting from the connection at the rear side center.

7030C18 -SUNROOF /HARD TOP WINDOW SHADE - R.R.

Removal

  1. Unscrew the clamping screw (1a) and remove the sunroof window shade(1b)from its seat.
Diagram showing a hand using a tool to unscrew a clamping screw (1a) on a sunroof window shade (1b).

Refitting

  • Position the window shade seats in the suitable connections placed on the sunroof, then screw the clamping screw.

7030C22 - SUNROOF /HARD TOP MANUAL CONTROL - R.R.

Removal

  • Carry out. 7030C18 - SUNROOF WINDOW SHADE - R.R.
  • Carry out Op. 7030C10 - SUNROOF /HARD TOP WINDOW - R.R.
  1. Unscrew the clamping screws (1a), remove the window connection system (1b).
Diagram showing clamping screws (1a) and a capping (1b) on a sunroof manual control assembly.
  1. Unscrew the clamping screws(1a), remove the capping(1b),extract the sunroof manual control(1c)from its seat.
Diagram showing clamping screws (1a), a window connection system (1b), and a manual control unit (1c) being removed from a sunroof.

Refitting

  • Position the manual control in the proper seat.
  • Assemble the capping and screw the clamping screws.
  • Position on seat the window connection system and screw the clamping screws.
  • Complete with Op. 7030C10 - SUNROOF/HARD TOP WINDOW - R.R.
  • Complete with Op. 7030C18 - SUNROOF WINDOW SHADE - R.R.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.