E02 Clutch slips
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Clutch › E02 Clutch slips
DiagnosisE02 Clutch slips · page 1 of 2
E02 Clutch slips
When accelerating, a considerable increase of engine rpm is noted without a corresponding increase of car speed.
The symptom can be easily checked pressing the clutch pedal and engaging 4th gear, when accelerating and gradually releasing the clutch pedal, the car does not move and the engine does not stop.
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| OK | ⚠ | 🔧 | |||
| 1 | CHECK CLUTCH PEDAL Check clutch pedal stroke |
All OK Go to Step 2 |
Problems found Incorrect pedal stroke |
Intervention Restore clutch pedal operation PROCEDURE 3330B |
|
| 2 | CHECK CLUTCH PLATE Check: - clutch plate wear - oil or grease on the clutch plate - distortion of clutch plate - damage to pressure plate diaphragm spring |
All OK Go to Step 3 |
Problems found Faulty clutch plate or pressure plate |
Intervention Replace clutch plate PROCEDURE OP. 1810A20 If oil or grease is found, also replace gearbox inlet oil seal PROCEDURE OP. 2110C20 |
|
| 3 | CHECK GROOVED HUB Check for excess of grease on clutch plate hub and gearbox primary shaft bushes |
All OK Go to Step 4 |
Problems found Faulty gearbox primary shaft hub |
Intervention Restore correct bush lubrication If required, replace clutch plate PROCEDURE OP. 1810A20 or gearbox primary shaft PROCEDURE OP. 2110B32 |
|
(Cont..)
Parts & tools for this job For 1998 Fiat Seicento
- PARTClutch kitSearch: Fiat Seicento 1998 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Fiat Seicento manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.