X10 Engine coolant leakages (page 2 of 2)
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Consumption leaks and wear
DiagnosisX10 Engine coolant leakages · page 2 of 2
(Continued Engine coolant leakages)
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| OK | Problems found | Intervention | |||
| 6 | CHECK THERMOSTAT UNIT Check: – intactness of thermostat unit – tightness of seals |
All OK Go to Step 7 |
Faulty thermostat unit | Replace thermostat unit or seals PROCEDURE OP. 1088C30 |
|
| 7 | CHECK CYLINDER HEAD GASKET Check: – correct cylinder head tightness – tightness of gasket |
All OK Go to Step 8 |
Incorrect cylinder head tightness | Restore correct tightness PROCEDURE OP. 1016C40 |
|
| Damaged gasket | Replace gasket PROCEDURE OP. 1016C10 |
||||
| 8 | CHECK CORRECT OPERATION Check the fault is no longer present |
All OK End of test |
Fault persists | Seek the fault starting from another symptom | |
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.