Diagnosis table
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Radio and accessories › Diagnosis table
DiagnosisDiagnosis table
Diagnosis table
N01 Cigar lighter / power socket does not work
Pressing the cigar lighter, with the key at MAR, or plugging in an electric device the cigar lighter /power socket does not work.
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| OK | ⚠ | 🔧 | |||
| 1 | Check power socket | All OK | Problems found | Intervention | |
| Check power socket. In particular, check that the socket internal thermal protection device has not tripped due to overload | Go to Step 2 | Thermal protection tripped | Replace thermal protection or power socket PROCEDURE OP. 7065C72 | ||
| 2 | CHECK CIGAR LIGHTER ELECTRIC CIRCUIT | All OK | Problems found | Intervention | |
| Check in sequence: – cigar lighter fuse (F24) – starting cut off relay – cigar lighter earth – connection between cigar lighter and junction unit (Wiring diagram: E3070 “Cigar lighter/power socket”) |
Go to Step 3 | Faulty component | Replace component (if it is a fuse, investigate the causes which may have triggered it) | ||
| Incorrect connections | Restore connections | ||||
| 3 | CHECK CORRECT OPERATION | All OK | Problems found | Intervention | |
| Check the fault is no longer present | End of test | – | – | ||
Parts & tools for this job For 1998 Fiat Seicento
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Seicento
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.