N10 Radio does not work
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Radio and accessories › N10 Radio does not work
DiagnosisN10 Radio does not work
N10 Radio does not work
Operating the corresponding control, the radio is not turned on.
If the radio cannot be heard, or sound is poor, see table N11
If the radio is turned on but reception is poor, see table N12
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| OK | ⚠ | 🔧 | |||
| 1 | CHECK RADIO ELECTRIC CIRCUIT | All OK | Problems found | Intervention | |
| Check in sequence: – radio protection fuses (F15 and F22) – connection between radio and junction unit – radio earth (Wiring diagram: E3510 “Radio”) |
Go to Step 2 |
Faulty component | Replace component (if it is a fuse, investigate the causes which may have triggered it) | ||
| Incorrect connections | Restore connections | ||||
| 2 | CHECK RADIO | All OK | Problems found | Intervention | |
| Check radio operation | Go to Step 3 |
Faulty radio | Replace radio | ||
| 3 | CHECK CORRECT OPERATION | All OK | Problems found | Intervention | |
| Check the fault is no longer present | End of test | – | – | ||
Parts & tools for this job For 1998 Fiat Seicento
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Seicento
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.