Subgroup contents
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Engine › Subgroup contents
TestsSubgroup contents
Subgroup contents
- WARNINGS
- IMPORTANT NOTES - UNIT TESTS
Units contents
| Grp. | Description | Validity |
|---|---|---|
| 1080B | Emission control system at exhaust | |
| 1080E | Evaporation control system |
WARNING
The engine compartment contains many parts in motion, components at high temperatures and live electric cables. Scrupulously follow these precautions when working on the engine compartment:
- Switch off the engine and wait for it to cool.
- Do not smoke.
- Do not use naked flames.
- Make sure that there is a fire extinguisher nearby.
WARNINGS
At every reassembly always replace seal gaskets, oil seal rings, spring washers, safety plates, self locking nuts and any deteriorated parts.
1080B - EMISSION CONTROL SYSTEM AT EXHAUST
List of unit tests
| Test | Description | Validity |
|---|---|---|
| A | Lambda sensor operation check |
UNIT TESTS
A - LAMBDA SENSOR OPERATION CHECK
- Disconnect the battery negative (-) terminal.
- Disconnect the lambda sensor electrical connection.
| Name | Code |
|---|---|
| Lambda sensor | K40 |
- Check that the heater resistance corresponds to the specified value.
| Measurement | Value |
|---|---|
| Lambda sensor heater resistance (Ω) | Pin 3-4 at 20°C 3.4±0.7 |
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.