Ignition switch contacts carrier block - r+r
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Engine starting › Ignition switch contacts carrier block - r+r
Electrical equipmentIgnition switch contacts carrier block - r+r
Ignition switch contacts carrier block - r+r
Removing
- 5530B56 BATTERY DRIP TRAY COVER - R.R.
Disconnect the battery negative terminal.
- 7040A26 steering column trim - r+r
1. Disconnect the electrical connectors of the ignition block (1a) and Cruise Control (1b).
| Name | Connector | |
|---|---|---|
| 1a | Ignition switch | H1 |
| Name | Connector | |
|---|---|---|
| 1b | Cruise Control | H7 |
2. Release the retaining clips on the ignition switch contact block.
1. Remove the ignition switch contact block.
Refitting
Insert the contact block in its seating in the ignition switch until the retaining clips engage.
Connect the electrical connectors of the ignition block and Cruise Control.
| Name | Connector | |
|---|---|---|
| Ignition switch | H1 |
| Name | Connector | |
|---|---|---|
| Cruise Control | H7 |
- 7040A26 steering column trim - r+r
Connect the battery negative terminal.
Parts & tools for this job For 2001 Fiat Stilo
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.