Alarm not working luggage compartment unlocked
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Alarm › Alarm not working luggage compartment unlocked
ALARM NOT WORKING LUGGAGE COMPARTMENT UNLOCKED
When the alarm is activated, the boot lid release control is not enabled from the remote control.
The boot lock/release control is managed by the body computer Node, which sends a signal to the electric catch
| Results of the tests | ||||
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
Ensure the door lock system is working properly. In particular, check that the 'independent boot' option is disabled. Then close the doors using the remote contro of mechanical key. Carry out the above operations using the second remote control. | Continue to Step 1 | Door lock system not working: doors and boot do not close/open simultaneously. | Test the door lock system See table P10 CENTRAL LOCKING. | |
| Door lock system not working: doors and boot lid do not close/open simultaneously. | Continue to Step 3 | |||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Connect the diagnostic equipment o the body computer node and check for errors. | Continue to Step 2 | Errors found: boot lid opening relay short-circuited. | Change the boot control relay. | |
| 2 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Keep the Examiner connected and check, in parameter mode, that the boot open/close command from the remote control is properly received. | Continue to Step 4 | The boot open/close command from the remote control is not received. | Continue to Step 3 | |
| 3 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| While in parameter mode, check operation of the remote control/s. In particular, check that each individual key is properly downloaded. | Continue to Step 5 | Individual remote control commands are not received correctly. | Change the faulty remote control unit/s | |
| 4 | CHECKING ELECTRICAL CIRCUIT | All OK | Problems met | Operation |
| Check continuity/insulation of the electrical connection between boot catch with facia control unit and short-circuited joint. | Continue to Step 6 | Electrical connection broken or not insulated. | Restore the damaged electrical connection See E7015 ALARM | |
| 5 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Change the body computer node Op. 5505A32 Search for the fault starting from another symptom' | |
| 6 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Change the bonnet catch Op. 5525B38 Search for the fault starting from another symptom' | |
Parts & tools for this job For 2001 Fiat Stilo
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Stilo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.