Reversing lights two always on
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Lights › Reversing lights two always on
‹ Prev Reversing light (one) rh or lh not workingNext › Turn signal front (one) rh or lh not working
Fault diagnosisReversing lights two always on
REVERSING LIGHTS TWO ALWAYS ON
Reversing lights stay on even with reverse not engaged
| Results of the tests | ||||
| 1 | CHECKING REVERSING LIGHT SWITCH | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check reversing light switch operation | Continue to Step 2 | Switch always closed | Replace switch Op. 5550D22 | |
| 2 | CHECKING ELECTRICAL EQUIPMENT | All OK | Problems met | Operation |
| Check wires of lead from switch to intermediate connection are insulated from one another See E2022 REVERSING LIGHTS | Continue to Step 3 | Wiring s.c. | Renew the wiring See E2022 REVERSING LIGHTS | |
| 3 | CHECKING ELECTRICAL EQUIPMENT | All OK | Problems met | Operation |
| Check wires of lead from facia control unit to intermediate connection are insulated from one another See E2022 REVERSING LIGHTS | Continue to Step 4 | Wiring s.c. | Renew the wiring See E2022 REVERSING LIGHTS | |
| 4 | CHECKING ENGINE BAY CONTROL UNIT | All OK | Problems met | Operation |
| Check insulation of engine bay control unit internal circuit See E2022 REVERSING LIGHTS | Continue to Step 5 | Circuit s.c. | Change engine bay junction unit Op. 5505A13 | |
| 5 | CHECK CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | The fault persists | Search for the fault starting from another symptom' | ||
‹ Prev Reversing light (one) rh or lh not workingNext › Turn signal front (one) rh or lh not working
Parts & tools for this job For 2001 Fiat Stilo
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Stilo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.