Gear lever knob - r + r
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Manual gearbox external controls › Gear lever knob - r + r
Gear lever knob - r + r
Removing
Release the gear lever protective boot.
Before removing and refitting the gear lever knob, protect the contact areas betwen the knob and the tool with felt, bodywork tape, etc. to prevent superficial damage.
1. Position the tool as illustrated in the diagram.
| Name | Country | |
|---|---|---|
| 1 | Extractor | 1.870.668.000 |
2. Undo the movement bolt (2a) until the knob (2b) is completely removed from the lever (2c).
Removing
Release the gear lever protective boot.
Before removing and refitting the gear lever knob, protect the contact areas betwen the knob and the tool with felt, bodywork tape, etc. to prevent superficial damage.
1. Position the tool as illustrated in the diagram.
| Name | Country | |
|---|---|---|
| 1 | Extractor | 1.870.668.000 |
2. Undo the movement bolt (2a) until the knob (2b) is completely removed from the lever (2c).
Refitting
| Name | Country | |
|---|---|---|
| s | Extractor | 1.870.668.000 |
2. Tighten the movement bolt (2a) until the knob (2b) is fully fitted on the lever (2c).
Refitting
| Name | Country | |
|---|---|---|
| s | Extractor | 1.870.668.000 |
2. Tighten the movement bolt (2a) until the knob (2b) is fully fitted on the lever (2c).
Parts & tools for this job For 2001 Fiat Stilo
- PARTClutch kitSearch: Fiat Stilo 2001 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Fiat Stilo manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.