Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Stilo Factory Service Manual (2001-2007)01 · General information
01 · General

Towing points

Make
Fiat
Model
Stilo Factory Service Manual
Year
2001–2007
Section
Vehicle towing and lifting points › Towing points
General informationTowing points

TOWING POINTS

The vehicle has two threaded sockets, one at the front and one at the rear, for fitting the tow hook which is housed in the compartment in the spare wheel in the luggage compartment under the carpet.

TOWING POINTS

When towing the vehicle, the laws governing towing and road traffic must be obeyed.

Thoroughly clean the threaded housing before tightening the tow hook.

Before towing, make sure that the tow hook is fully tightened.

Turn the ignition key to the ON position and then to the OFF position and DO NOT EXTRACT IT !

When the key is extracted, the steering lock is immediately engaged and it is consequently impossible to steer the wheels.

With the engine switched off, as the brake servo and the power assisted steering are not working, greater force will have to be exerted on both the pedal and the steering wheel.

Parts & tools for this job For 2001 Fiat Stilo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.