Workshop Manuals Factory service & repair Fiat
Fiat Ulysse Factory Service Manual (2002-2010)08 · Engine
08 · Engine

Cam angle sensor - r r

Make
Fiat
Model
Ulysse Factory Service Manual
Year
2002–2010
Section
Diesel injection system › Cam angle sensor - r r
EngineCam angle sensor - r r

CAM ANGLE SENSOR - R R

Operation 1060G22 · DIESEL INJECTION PRESSURE PUMP ELECTRONIC CONTROL

2.0 16V JTD

Removing

See in Op. 1088B10

1. Disconnect the electrical connection for the sensor.

2. Undo the retaining bolt.

3. Release and remove the cam angle sensor.

CAM ANGLE SENSOR - R R

Refitting

- Place the cam angle sensor in position and tighten the fixing bolt.

- Connect the electrical connection.

See in Op. 1088B10

Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY

2.2 16V JTD

Removing

See in Op. 1088B10

1. Disconnect the electrical connection for the sensor.

2. Undo the retaining bolt.

3. Release and remove the cam angle sensor.

CAM ANGLE SENSOR - R R

Refitting

- Place the cam angle sensor in position and tighten the fixing bolt.

- Connect the electrical connection.

See in Op. 1088B10

Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY

Parts & tools for this job For 2002 Fiat Ulysse

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.