FUEL DELIVERY MANIFOLD - R R

Operation 1060F30 · INJECTORS AND PIPES

2.0 16V JTD

Removing

See in Op. 1048B10

Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.

Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.

Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R

Op. 7055A18 L/H OR R/H SIDE RUBBING STRIP DECORATIVE SEAL - R+R

Op. 5050B38 WINDSCREEN WIPER ASSEMBLY - R+R OR REPAIR

See in Op. 1048A10

See in Op. 1080C54

See in Op. 1044B10

See in Op. 1060F36

See in Op. 1060F20

1. Disconnect the rapid connectors for the fuel pipes.

1. Disconnect the electrical connection for the fuel pressure sensor (1a) and the electrical connection for the fuel temperature sensor (1b).

1. Undo the fixinb bolts (1a) and the nut (1b) and remove the single fuel manifold pipe complete with sensors (1c).

Refitting

- Fit the single fuel manifold pipe complete with sensors in place and tighten the nuts and bolts to torque.

- Cconnect the electrical connection for the fuel pressure sensor and the electrical connection for the fuel temperature sensor.

- Connect the rapid connectors for the fuel pipes.

See in Op. 1060F20

See in Op. 1060F36

See in Op. 1044B10

See in Op. 1080C54

See in Op. 1048A10

Op. 5050B38 WINDSCREEN WIPER ASSEMBLY - R+R OR REPAIR

Op. 7055A18 L/H OR R/H SIDE RUBBING STRIP DECORATIVE SEAL - R+R

Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R

Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.

Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.

See in Op. 1048B10

- If necessary, top up the coolant fluid level.

2.2 16V JTD

Removing

See in Op. 1048B10

Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.

Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.

Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R

Op. 7055A18 L/H OR R/H SIDE RUBBING STRIP DECORATIVE SEAL - R+R

Op. 5050B38 WINDSCREEN WIPER ASSEMBLY - R+R OR REPAIR

See in Op. 1048A10

See in Op. 1080C54

See in Op. 1044B10

See in Op. 1060F36

See in Op. 1060F20

1. Disconnect the rapid connectors for the fuel pipes.

1. Disconnect the electrical connection for the fuel pressure sensor (1a) and the electrical connection for the fuel temperature sensor (1b).

1. Undo the fixing bolts (1a) and the nut (1b) and remove the single fuel manifold pipe complete with sensors (1c).

Refitting

- Fit the single fuel manifold pipe complete with sensors in place and tighten the nuts and bolts to torque.

- Cconnect the electrical connection for the fuel pressure sensor and the electrical connection for the fuel temperature sensor.

- Connect the rapid connectors for the fuel pipes.

See in Op. 1060F20

See in Op. 1060F36

See in Op. 1044B10

See in Op. 1080C54

See in Op. 1048A10

Op. 5050B38 WINDSCREEN WIPER ASSEMBLY - R+R OR REPAIR

Op. 7055A18 L/H OR R/H SIDE RUBBING STRIP DECORATIVE SEAL - R+R

Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R

Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.

Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.

See in Op. 1048B10

- If necessary, top up the coolant fluid level.