Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Ulysse Factory Service Manual (2002-2010)08 · Engine
08 · Engine

Egr system vacuum tank - r r

Make
Fiat
Model
Ulysse Factory Service Manual
Year
2002–2010
Section
Exhaust emission control system › Egr system vacuum tank - r r
EngineEgr system vacuum tank - r r

EGR SYSTEM VACUUM TANK - R R

Operation 1080C60 · EXHAUST GAS RECIRCULATION SYSTEM (E.G.R.)

2.2 16V JTD

Removing

1. Undo the reservoir retaining nuts.

EGR SYSTEM VACUUM TANK - R R

Op. 4450B02 LEFT FRONT WHEEL R R

Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.

1. Disconnect the vacuum pipes.

2. Remove the vacuum reservoir.

EGR SYSTEM VACUUM TANK - R R

Refitting

- Place the reservoir in position and tighten the fixing nuts.

- Connect the vacuum pipes to the reservoir.

Op. 4450B02 LEFT FRONT WHEEL R R

Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.

Parts & tools for this job For 2002 Fiat Ulysse

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.